The Digitalisation of Construction (2016–2025): A Critical Narrative Review of BIM, AI, Robotics and Digital Twins: Evidence Maturity, Circular Economy Disconnect and a Research Agenda

Authors

  • Adamu Wahab Department of Construction Technology and Management Education, University of Skills Training and Entrepreneurial Development, Kumasi, Ghana https://orcid.org/0000-0003-3729-3962
  • Issah Chakurah Department of Vocational and Technical Education, University of Cape Coast, Cape Coast, Ghana https://orcid.org/0000-0002-2055-0769
  • Sulley Reagan Department of Building and Construction, Wa Technical Institute, Wa, Ghana
  • Emmanuel Kojo Asante Department of Architecture Draughtsmanship, Pilot Technical Institute, Kokomlemle, Ayawaso, Ghana

DOI:

https://doi.org/10.15377/2409-9821.2026.13.17

Keywords:

Digital twin, Construction 4.0, Circular economy, Artificial intelligence, Construction automation, Building information modelling (BIM)

Abstract

Research on construction digitalisation has grown quickly but remains fragmented. This narrative review examines Scopus-indexed journal articles published between 2016 and 2025 on Building Information Modelling (BIM), artificial intelligence (AI), robotics, digital twins and related automation. A pool of 494 records was screened by title, abstract and keywords, and 89 articles were retained. An eligibility audit then separated 78 core studies from 11 records in which digital technology was contextual. The review combines a descriptive profile of the literature with an explicit, criteria based assessment of evidence maturity and of circular economy linkage. This narrative review used a single database and screening by one reviewer. Exclusion followed a construct based relevance test and not study quality. The exact date of the Scopus search was not recorded. Output accelerated after 2022 (74.2% of the 89 articles appeared from 2023 to 2025), 77.5% appeared in two MDPI journals, and author affiliations were concentrated in China and the United Kingdom. Nine overlapping themes emerged, led by BIM for design, coordination and compliance (39 core studies), robotics, automation and additive manufacturing (30), and AI and machine learning (24). Six records addressed circularity or waste reduction, and only two applied a digital tool to a material recovery or waste outcome. Within the retrieved sample, the link to the circular economy is therefore a thin evidence base and not an established finding, and the low count may partly reflect the search strategy. Case studies, pilots and cross sectional surveys are common (19 and 16 of the 89 screened records, respectively), whereas longitudinal studies and multisite validation appear limited. Blockchain evidence in the sample is minimal. A research agenda is proposed for validated, integrated and context-sensitive studies.

Author Biography

  • Issah Chakurah, Department of Vocational and Technical Education, University of Cape Coast, Cape Coast, Ghana

    Department of Vocational and Technical Education

References

[1] Bühler MM, Nübel K, Jelinek T, Köhler L, Hollenbach P. Bridging the Construction Productivity Gap—A Hierarchical Framework for the Age of Automation, Robotics, and AI. Buildings. 2025;15(16):2899. https://doi.org/10.3390/buildings15162899

[2] Akinade OO, Oyedele LO, Ajayi SO, Bilal M, Alaka HA, Owolabi HA, et al. Designing out construction waste using BIM technology: Stakeholders’ expectations for industry deployment. Journal of Cleaner Production. 2018;180:375–385. https://doi.org/10.1016/j.jclepro.2018.01.022

[3] Alwan Z, Jones P, Holgate P. Strategic sustainable development in the UK construction industry, through the framework for strategic sustainable development, using Building Information Modelling. Journal of Cleaner Production. 2017;140:349–358. https://doi.org/10.1016/j.jclepro.2015.12.085

[4] Selçuk Çıdık M, Boyd D, Thurairajah N. Innovative Capability of Building Information Modelling in Construction Design. Journal of Construction Engineering and Management. 2017;143(8):4017047. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001337

[5] Regona M, Yigitcanlar T, Xia B, Li RYM. Opportunities and adoption challenges of AI in the construction industry: a PRISMA review. Journal of Open Innovation: Technology, Market, and Complexity. 2022;8(1):45. https://doi.org/10.3390/joitmc8010045

[6] Datta SD, Islam M, Sobuz HR, Ahmed S, Kar M. Artificial intelligence and machine learning applications in the project lifecycle of the construction industry: a comprehensive review. Heliyon. 2024;10(5). https://doi.org/10.1016/j.heliyon.2024.e26888

[7] Ivanova S, Kuznetsov A, Zverev R, Rada A. Artificial intelligence methods for the construction and management of buildings. Sensors. 2023;23(21). https://doi.org/10.3390/s23218740

[8] Heidari A, Peyvastehgar Y. A systematic review of BIM in construction: from smart building management to interoperability of BIM & AI. Architectural Science Review. 2024. https://doi.org/10.1080/00038628.2023.2243247

[9] Ghobadi M, Sepasgozar SME. Challenges and Benefits of Implementing AI in Timber Construction for Circular Economy Goals. Buildings. 2025;15(7):1073. https://doi.org/10.3390/buildings15071073

[10] Elmousalami H, Maxy M, Hui FKP, Aye L. AI in automated sustainable construction engineering management. Automation in Construction. 2025;175:106202. https://doi.org/10.1016/j.autcon.2025.106202

[11] Ding C, Ke J, Levine M, Granderson J, Zhou N. Potential of artificial intelligence in reducing energy and carbon emissions of commercial buildings at scale. Nature Communications. 2024;15(1). https://doi.org/10.1038/s41467-024-50088-4

[12] Olawumi TO, Chan DW, Wong JK, Chan AP. Barriers to the integration of BIM and sustainability practices in construction projects: A Delphi survey of international experts. Journal of Building Engineering. 2018;20:60–71. https://doi.org/10.1016/j.jobe.2018.06.017

[13] Feng R, Jia Y, Wang T, Gan H. Research on the System Design and Target Recognition Method of the Rebar-Tying Robot. Buildings. 2024;14(3):838. https://doi.org/10.3390/buildings14030838

[14] Xiao C, Liu Y, Akhnoukh A. Bibliometric review of artificial intelligence (AI) in construction engineering and management. In: Proceedings of the Construction Research Congress 2018. Reston: American Society of Civil Engineers; 2018. p. 34–44. https://doi.org/10.1061/9780784481721.004

[15] Nguyen Van Tam N, Nguyen Quoc Toan N. Research trends on machine learning in construction management: a scientometric analysis. Journal of Applied Science and Technology Trends. 2021;2(2):124–32. https://doi.org/10.38094/jastt203105

[16] Le NN, Phung HT, Phan HP, Nguyen CD, Mai BQ. Artificial intelligence (AI) applications in the construction industry: a big data-driven bibliometric analysis. In: RIVF International Conference on Computing and Communication Technologies (RIVF 2025). IEEE, 2025. p. 892–6. https://doi.org/10.1109/RIVF68649.2025.11365231

[17] Demirkesen S, Tezel A. Investigating major challenges for Industry 4.0 adoption among construction companies. Engineering, Construction and Architectural Management. 2022;29(3):1470–1503. https://doi.org/10.1108/ECAM-12-2020-1059

[18] Oti-Sarpong K, Pärn EA, Burgess G, Zaki M. Transforming the construction sector: an institutional complexity perspective. Construction Innovation. 2022;22(2):361–387. https://doi.org/10.1108/CI-04-2021-0071

[19] Maqbool R, Saiba MR, Ashfaq S. Emerging Industry 4.0 and Internet of Things (IoT) technologies in the Ghanaian construction industry: sustainability, implementation challenges, and benefits. Environmental Science and Pollution Research. 2023;30(13). https://doi.org/10.1007/s11356-022-24764-1

[20] Dosumu OS, Mahame C, Niyitegeka S, Hahiirwuwambaza JA. Applications and challenges of adopting the Internet of Things (IoT) in the Rwandan construction industry. Journal of Construction in Developing Countries. 2023;28(2):81–100. https://doi.org/10.21315/jcdc-05-22-0098

[21] Ebekozien A, Aigbavboa C. COVID-19 recovery for the Nigerian construction sites: the role of the fourth industrial revolution technologies. Sustainable Cities and Society. 2021;69. https://doi.org/10.1016/j.scs.2021.102803

[22] Wu Z, Lu Y, He Q, Hong Q, Chen C, Antwi-Afari MF. Investigating the Key Hindering Factors and Mechanism of BIM Applications Based on Social Network Analysis. Buildings. 2022;12(8):1270. https://doi.org/10.3390/buildings12081270

[23] Deng J, Li X, Rao J. Research on Influencing Factors and Driving Path of BIM Application in Construction Projects Based on the SD Model in China. Buildings. 2023;13(11):2794. https://doi.org/10.3390/buildings13112794

[24] Rui S, Makanae K, Liu J, Wu J, Fujiu M, Morisaki Y. A Mixed-Method Comparative Analysis of BIM Technology Adoption in China’s and Japan’s Construction Sectors. Buildings. 2025;15(13):2234. https://doi.org/10.3390/buildings15132234

[25] Ma J, Mao S, Lin W, Zhu X. Exploring Behavioural Mechanisms of BIM Outsourcing in Construction Enterprises: A TPB-Based Empirical Study from China. Buildings. 2025;15(17):3032. https://doi.org/10.3390/buildings15173032

[26] Mujahed L, Feng G, Wang J. Platform Approaches in the AEC Industry: Stakeholder Perspectives and Case Study. Buildings. 2025;15(15):2684. https://doi.org/10.3390/buildings15152684

[27] El Hajj CI, Martínez Montes G. Examining Green Building Practices: The Influence on Building Information Modelling Function Diffusion. Sustainability. 2025;17(9):3843. https://doi.org/10.3390/su17093843

[28] He D, Li Z, Wu C, Ning X. An e-commerce platform for industrialised construction procurement based on BIM and linked data. Sustainability. 2018;10(8):2613. https://doi.org/10.3390/su10082613

[29] Yardımcı Y, Kurucay E. LCA-TOPSIS Integration for Minimising Material Waste in the Construction Sector: A BIM-Based Decision-Making. Buildings. 2024;14(12):3919. https://doi.org/10.3390/buildings14123919

[30] Kaewunruen S, Sresakoolchai J, Zhou Z. Sustainability-based lifecycle management for bridge infrastructure using 6D BIM. Sustainability. 2020;12(6):2436. https://doi.org/10.3390/su12062436

[31] Nabawy M, Mohamed AG, Awad I, Daoud AO. Green Building Information Modelling Framework for Sustainable Residential Development in Egypt. Buildings. 2025;15(7):1035. https://doi.org/10.3390/buildings15071035

[32] Zhang L, Chu Z, Song H. Understanding the relation between BIM application behaviour and sustainable construction: A case study in China. Sustainability. 2020;12(1):1–17. https://doi.org/10.3390/su12010306

[33] Ullah H, Zhang H, Ye H, Ali I, Cong M. Research on Low-Carbon Design and Energy Efficiency by Harnessing Indigenous Resources through BIM-Ecotect Analysis in Hot Climates. Sustainability. 2024;16(14):6057. https://doi.org/10.3390/su16146057

[34] Piaia E, Turillazzi B, Di Giulio R, Sebastian R. Advancing the Decarbonization of the Construction Sector: Lifecycle Quality and Performance Assurance of Nearly Zero-Energy Buildings. Sustainability. 2024;16(9):3687. https://doi.org/10.3390/su16093687

[35] Llatas C, Soust-Verdaguer B, Torres LC, Cagigas D. Application of Knowledge Discovery in Databases (KDD) to environmental, economic, and social indicators used in BIM workflow to support sustainable design. Journal of Building Engineering. 2024;91:109546. https://doi.org/10.1016/j.jobe.2024.109546

[36] Cascone S. Eco-Innovative Construction: Integrating Green Roof Design within the BIM Framework. Sustainability. 2024;16(5):1967. https://doi.org/10.3390/su16051967

[37] Asfandyar M, Bazai NA, Chen H, Habib M, Iqbal J, Baig MA, et al. Enhancing Sustainable Flood Resilience and Energy Efficiency in Residential Structures: Integrating Hydrological Data, BIM, and GIS in Quetta, Pakistan. Sustainability. 2025;17(6):2496. https://doi.org/10.3390/su17062496

[38] Rafindadi AD, Shafiq N, Othman I. A Conceptual Framework for BIM Process Flow to Mitigate the Causes of Fall-Related Accidents at the Design Stage. Sustainability. 2022;14(20):13025. https://doi.org/10.3390/su142013025

[39] Buhamdan S, Duncheva T, Alwisy A. Developing a BIM and Simulation-Based Hazard Assessment and Visualisation Framework for CLT Construction Design. Journal of Construction Engineering and Management. 2021;147(3):4021003. https://doi.org/10.1061/(ASCE)CO.1943-7862.0002000

[40] Amin Ranjbar A, Ansari R, Taherkhani R, Hosseini MR. Developing a novel cash flow risk analysis framework for construction projects based on 5D BIM. Journal of Building Engineering. 2021;44:103341. https://doi.org/10.1016/j.jobe.2021.103341

[41] Zhang C, Kumar D, Li H, Zhou R, Lv L, Tian J. Development of a BIM-Enabled Automated Cost Segregation System. Buildings. 2023;13(7):1805. https://doi.org/10.3390/buildings13071805

[42] Rashidi A, Chan DWM, Ravanshadnia M, Sarvari H, Tajaddini A. Applying Building Information Modelling (BIM) Technology in Pre-Tender Cost Estimation of Construction Projects: A Case Study in Iran. Buildings. 2024;14(5):1260. https://doi.org/10.3390/buildings14051260

[43] Wang D, Lu H. Development of a BIM Platform for the Design of Single-Story Steel Structure Factories. Buildings. 2024;14(3):747. https://doi.org/10.3390/buildings14030747

[44] Wang L, Li J, Ye Q, Li Y, Feng A. Automatic Planning Method of Construction Schedule under Multi-Dimensional Spatial Resource Constraints. Buildings. 2024;14(10):3231. https://doi.org/10.3390/buildings14103231

[45] Liu Z, He Y, Demian P, Osmani M. Immersive Technology and Building Information Modelling (BIM) for Sustainable Smart Cities. Buildings. 2024;14(6):1765. https://doi.org/10.3390/buildings14061765

[46] Liu Y, Deng Y, Liu Z, Osmani M. Integration of Building Information Modelling (BIM) with Transportation and Facilities: Recent Applications and Future Perspectives. Buildings. 2024;14(2):541. https://doi.org/10.3390/buildings14020541

[47] Liu Z, Liu Y, Osmani M. Integration of Smart Cities and Building Information Modelling (BIM) for a Sustainability-Oriented Business Model to Address Sustainable Development Goals. Buildings. 2024;14(5):1458. https://doi.org/10.3390/buildings14051458

[48] Chen Q, Li C, Xu X, Mao P, Xiong L. Intelligent Systems Integrating BIM and VR for Urban Subway Microenvironmental Health Risks Management. Buildings. 2024;14(7):1912. https://doi.org/10.3390/buildings14071912

[49] Chen N, Lin X, Jiang H, An Y. Automated Building Information Modelling Compliance Check through a Large Language Model Combined with Deep Learning and Ontology. Buildings. 2024;14(7):1983. https://doi.org/10.3390/buildings14071983

[50] Dagou HH, Gurgun AP, Koc K, Budayan C. The Future of Construction: Integrating Innovative Technologies for Smarter Project Management. Sustainability. 2025;17(10):4537. https://doi.org/10.3390/su17104537

[51] Kirschke P, Sietko D. The function and potential of innovative reinforced concrete prefabrication technologies in achieving residential construction goals in Germany and Poland. Buildings. 2021;11(11):533. https://doi.org/10.3390/buildings11110533

[52] Navaratnam S. Selecting a Suitable Sustainable Construction Method for Australian High-Rise Building: A Multi-Criteria Analysis. Sustainability. 2022;14(12):7435. https://doi.org/10.3390/su14127435

[53] Anaç M, Gümüşburun Ayalp G, Erdayandi K. Prefabricated Construction Risks: A Holistic Exploration through Advanced Bibliometric Tool and Content Analysis. Sustainability. 2023;15(15):11916. https://doi.org/10.3390/su151511916

[54] Alhumayani H, Gomaa M, Soebarto V, Jabi W. Environmental assessment of large-scale 3D printing in construction: A comparative study between cob and concrete. Journal of Cleaner Production. 2020;270:122463. https://doi.org/10.1016/j.jclepro.2020.122463

[55] Volpe S, Sangiorgio V, Petrella A, Coppola A, Notarnicola M, Fiorito F. Building envelope prefabricated with 3d printing technology. Sustainability. 2021;13(16):8923. https://doi.org/10.3390/su13168923

[56] Aminpour N, Memari A. Numerical and experimental study on reinforced 3DCP walls filled with lightweight concrete. Journal of Building Engineering. 2024;97:110995. https://doi.org/10.1016/j.jobe.2024.110995

[57] Wang B, Yang M, Liu S, Liu X, Zhao H, Wang X, et al. Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multimodal Analysis. Sustainability. 2024;16(21):9388. https://doi.org/10.3390/su16219388

[58] Dörrie R, Gantner S, Amiri FS, Lachmayer L, David M, Rothe T, et al. From Digital to Real: Optimised and Functionally Integrated Shotcrete 3D Printing Elements for Multi-Storey Structures. Buildings. 2025;15(9):1461. https://doi.org/10.3390/buildings15091461

[59] Li Y, Bi K, Fukuda H. Automated Screw-Fastened Assembly of Layered Timber Arch-Shells: Construction-Phase LCA and Performance Validation. Buildings. 2025;15(17):3186. https://doi.org/10.3390/buildings15173186

[60] Lai Z, Xiao Y, Chen Z, Li H, Huang L. Preserving Woodcraft in the Digital Age: A Meta-Model-Based Robotic Approach for Sustainable Timber Construction. Buildings. 2024;14(9):2900. https://doi.org/10.3390/buildings14092900

[61] Friese D, Hahn L, Le Xuan H, Mersch J, Neef T, Mechtcherine V, et al. Robot-Assisted Manufacturing Technology for 3D Non-Metallic Reinforcement Structures in Construction Applications. Buildings. 2023;13(11):2748. https://doi.org/10.3390/buildings13112748

[62] Krishna KVG, Kannaa KVD. AI-driven robotics in automated construction: enhancing efficiency, precision, safety, and sustainability. In: 2024 First International Conference on Data, Computation and Communication (ICDCC). IEEE, 2024. https://doi.org/10.1109/ICDCC62744.2024.10961274

[63] Sherkat S, Wortmann T, Wortmann A. Two decades of automated AI planning methods in construction and fabrication: a systematic review. ACM Computing Surveys. 2025. https://doi.org/10.1145/3729529

[64] Baghi Y, Ma Z, Robinson D, Boehme T. Innovation in sustainable solar-powered net-zero energy solar decathlon houses: A review and showcase. Buildings. 2021;11(4):171. https://doi.org/10.3390/buildings11040171

[65] Awosode OS, Ebiloma DO, Ajayi CA, Aigbavboa CO, Akinradewo O. The Relevance of Automation in the Facility Management of Selected High-Rise Buildings in Lagos, Nigeria †. Buildings. 2024;14(1):16. https://doi.org/10.3390/buildings14010016

[66] Tajs-Zielińska K, Bochenek B. Multi-domain and multi-material topology optimisation in design and strengthening of innovative sustainable structures. Sustainability. 2021;13(6):3435. https://doi.org/10.3390/su13063435

[67] Zhao X, Hwang BG, Low SP. An enterprise risk management knowledge-based decision support system for construction firms. Engineering, Construction and Architectural Management. 2016;23(3):369–384. https://doi.org/10.1108/ECAM-03-2015-0042

[68] Razveeva I, Kozhakin A, Beskopylny AN, Stel’makh SA, Shcherban’ EM, Artamonov S, et al. Analysis of Geometric Characteristics of Cracks and Delamination in Aerated Concrete Products Using Convolutional Neural Networks. Buildings. 2023;13(12):3014. https://doi.org/10.3390/buildings13123014

[69] Alhusban M, Alhusban M, Alkhawaldeh AA. The Efficiency of Using Machine Learning Techniques in Fiber-Reinforced-Polymer Applications in Structural Engineering. Sustainability. 2024;16(1):11. https://doi.org/10.3390/su16010011

[70] Abed M, Mehryaar E. A Machine Learning Approach to Predict Relative Residual Strengths of Recycled Aggregate Concrete after Exposure to High Temperatures. Sustainability. 2024;16(5):1891. https://doi.org/10.3390/su16051891

[71] Trinh HTMK, Chowdhury S, Liu T. Assessing embodied carbon of flat slab buildings – An ANN-integrated optimisation methodology. Journal of Cleaner Production. 2024;457:142377. https://doi.org/10.1016/j.jclepro.2024.142377

[72] Li Y, Li W, Zhang W, Liu C, Cachim P, Bezuijen A. Multi-objective optimisation of recycled fine aggregate geopolymer-based grouting materials using the response surface methodology and backpropagation neural network coupled approach. Construction and Building Materials. 2025;504:144529. https://doi.org/10.1016/j.conbuildmat.2025.144529

[73] Wang S, Kim M, Hae H, Cao M, Kim J. The Development of a Rebar-Counting Model for Reinforced Concrete Columns: Using an Unmanned Aerial Vehicle and Deep-Learning Approach. Journal of Construction Engineering and Management. 2023;149(11):4023111. https://doi.org/10.1061/JCEMD4.COENG-13686

[74] Lee YS, Rashidi A, Talei A, Kong D. Innovative Point Cloud Segmentation of 3D Light Steel Framing System through Synthetic BIM and Mixed Reality Data: Advancing Construction Monitoring. Buildings. 2024;14(4):952. https://doi.org/10.3390/buildings14040952

[75] Araya-Aliaga E, Atencio E, Lozano F, Lozano-Galant J. Automating Dataset Generation for Object Detection in the Construction Industry with AI and Robotic Process Automation (RPA). Buildings. 2025;15(3):410. https://doi.org/10.3390/buildings15030410

[76] Liu C, Zhang Q, Fan Y, Lin G, Huang Z. Research on Diagnosis and Assessment Processes and Methods for Existing Residential Buildings Based on Intelligent Assistance Models. Buildings. 2024;14(10):3062. https://doi.org/10.3390/buildings14103062

[77] Lystbæk MS, Beliatis MJ, Giannakidis A. Low-resource GAN-stack for high-resolution floor plan generation with enhanced evaluation and contextual validation. Journal of Building Engineering. 2025;114:114211. https://doi.org/10.1016/j.jobe.2025.114211

[78] Rafsanjani HN, Nabizadeh AH. Towards human-centred artificial intelligence (AI) in architecture, engineering, and construction (AEC) industry. Computers in Human Behaviour Reports. 2023;11:100312. https://doi.org/10.1016/j.chbr.2023.100312

[79] Onatayo D, Onososen A, Oyediran AO, Oyediran H, Arowoiya V, Onatayo E. Generative AI applications in architecture, engineering, and construction: trends, implications for practice, education & imperatives for upskilling: a review. Architecture. 2024;4(4):877–902. https://doi.org/10.3390/architecture4040046

[80] Davletbayeva D, Tennant S, Konanahalli A. Exploring data readiness for AI adoption in the construction industry. In: Proceedings of the 2025 ARCOM Conference. Association of Researchers in Construction Management; 2025. https://www.arcom.ac.uk/-docs/archive/2025-Indexed-Papers.pdf

[81] Arroyo P, Schöttle A, Christensen R. The ethical and social dilemma of AI uses in the construction industry. In: Alarcón LF, González VA, editors. Proceedings of the 29th Annual Conference of the International Group for Lean Construction. International Group for Lean Construction; 2021. p. 227–36. https://doi.org/10.24928/2021/0188

[82] Yang L, Allen G, Zhang Z, Zhao Y. Achieving on-site trustworthy AI implementation in the construction industry: a framework across the AI lifecycle. Buildings. 2025;15(1):21. https://doi.org/10.3390/buildings15010021

[83] Li Z, Tang D. Pathways of the Digital Economy’s Impact on Green Total Factor Productivity in the Construction Industry. Sustainability. 2024;16(24):11283. https://doi.org/10.3390/su162411283

[84] Emad S, Aboulnaga M, Wanas A, Abouaiana A. The Role of Artificial Intelligence in Developing the Tall Buildings of Tomorrow. Buildings. 2025;15(5):749. https://doi.org/10.3390/buildings15050749

[85] Kim JS. Advancing Sustainable Road Construction with Multiple Regression Analysis, Regression Tree Models, and Case-Based Reasoning for Environmental Load and Cost Estimation. Buildings. 2025;15(12):2083. https://doi.org/10.3390/buildings15122083

[86] Yoon SB, Hwang SE. Analysing Land Shape Typologies in South Korean Apartment Complexes Using Machine Learning and Deep Learning Techniques. Buildings. 2024;14(6):1876. https://doi.org/10.3390/buildings14061876

[87] Maurya S, Lakkimsetty NR, Manjunath TC, Shukla AK, Sethy BP, Behera RR. Balancing accuracy and interpretability: AI-driven predictive modelling of construction schedule performance in India. Asian Journal of Civil Engineering. 2025;26(7):3083–98. https://doi.org/10.1007/s42107-025-01363-2

[88] Lauria M, Azzalin M. Digital Transformation in the Construction Sector: A Digital Twin for Seismic Safety in the Lifecycle of Buildings. Sustainability. 2024;16(18):8245. https://doi.org/10.3390/su16188245

[89] Abdelalim AM, Said SO, Alnaser AA, Sharaf A, ElSamadony A, Kontoni DPN, et al. Agent-Based Modelling for Construction Resource Positioning Using Digital Twin and BLE Technologies. Buildings. 2024;14(6):1788. https://doi.org/10.3390/buildings14061788

[90] Ning G, Luo H, Yin W, Zhang Y. Exploration of the Application and Practice of Digital Twin Technology in Teaching Driven by Smart City Construction. Sustainability. 2024;16(23):10312. https://doi.org/10.3390/su162310312

[91] Tian N, Wang W. Innovative Pathways for Collaborative Governance in Technology-Driven Smart Communities. Sustainability. 2025;17(1):98. https://doi.org/10.3390/su17010098

[92] Khurshid K, Danish A, Salim MU, Bayram M, Ozbakkaloglu T, Mosaberpanah MA. An in-depth survey demystifying the Internet of Things (IoT) in the construction industry: unfolding new dimensions. Sustainability. 2023;15(2):1275. https://doi.org/10.3390/su15021275

[93] Alnaser AA, Elmousalami H. Benefits and challenges of AI-based digital twin integration in the Saudi Arabian construction industry: a correspondence analysis (CA) approach. Applied Sciences. 2025;15(9):4675. https://doi.org/10.3390/app15094675

[94] Cabral S, Klimenka M, Bademosi F, Lau D, Pender S, Villaggi L, et al. A Contactless Multi-Modal Sensing Approach for Material Assessment and Recovery in Building Deconstruction. Sustainability. 2025;17(2):585. https://doi.org/10.3390/su17020585

[95] Kaewunruen S, Lin YH, Guo Y. BIM-driven digital twin for demolition waste management of existing residential buildings. Scientific Reports. 2025;15. https://doi.org/10.1038/s41598-025-13938-9

[96] Petri I, Amin A, Ghoroghi A, Hodorog A, Rezgui Y. Digital twins for dynamic life cycle assessment in the built environment. Science of the Total Environment. 2025;993:179930. https://doi.org/10.1016/j.scitotenv.2025.179930

[97] Zhang Y, Luo W, Yu F. Construction of Chinese smart water conservancy platform based on blockchain: Technology integration and innovation application. Sustainability. 2020;12(20):1–16. https://doi.org/10.3390/su12208306

[98] Kamel MA, Bakhoum ES, Marzouk MM. A framework for smart construction contracts using BIM and blockchain. Scientific Reports. 2023;13. https://doi.org/10.1038/s41598-023-37353-0

[99] Olowe OT, Adebiyi AA, Obagbuwa IC, Marion AO, Michael EB. Improving efficiency and transparency in building construction through BIM and decentralised AI: a systematic review. NIPES Journal of Science and Technology Research. 2025;7(4):SI34. https://doi.org/10.37933/nipes/7.4.2025.SI34

[100] Wahab A, Danso H, Appiah-Kubi EA. Systematic review of agricultural ash supplementary cementitious materials as low-carbon alternatives to ordinary Portland cement from 2005 to 2025. Discover Concrete and Cement. 2026;2:61. https://doi.org/10.1007/s44416-026-00101-4

[101] Hu R, Bao Z, Lin Z, Lv K. The Innovative Construction of Provinces, Regional Artificial Intelligence Development, and the Resilience of Regional Innovation Ecosystems: Quasi-Natural Experiments Based on Spatial Difference-in-Differences Models and Double Machine Learning. Sustainability. 2024;16(18):8251. https://doi.org/10.3390/su16188251

[102] Li N, Jiang P, Li C, Wang W. College Teaching Innovation from the Perspective of Sustainable Development: The Construction and Twelve-Year Practice of the 2P3E4R System. Sustainability. 2022;14(12):7130. https://doi.org/10.3390/su14127130

[103] Li B, Jiang F, Xia H, Pan J. Under the Background of AI Application, Research on the Impact of Science and Technology Innovation and Industrial Structure Upgrading on the Sustainable and High-Quality Development of Regional Economies. Sustainability. 2022;14(18):11331. https://doi.org/10.3390/su141811331

[104] Wang L, Zhao Z, Xu X, Wang X, Wang Y. How Does the Construction of New Generation of National AI Innovative Development Pilot Zones Affect Carbon Emissions Intensity? Empirical Evidence from China. Sustainability. 2025;17(15):6858. https://doi.org/10.3390/su17156858

[105] Yang J, Hou H, Hu H. Exploring the Intelligent Emergency Management Mode of Rural Natural Disasters in the Era of Digital Technology. Sustainability. 2024;16(6):2366. https://doi.org/10.3390/su16062366

[106] Jiang W, Lu D, Zhao N. A New Design Approach: Applying Optical Fibre Sensing to 3D-Printed Structures to Make Furniture Intelligent. Sustainability. 2023;15(24):16715. https://doi.org/10.3390/su152416715

[107] Rudenko O, Beisekenov N, Sadenova M, Galkina D, Kulenova N, Begentayev M. Physical–Mechanical and Microstructural Properties of Non-Autoclaved Aerated Concrete with Ash-and-Slag Additives. Sustainability. 2025;17(1):73. https://doi.org/10.3390/su17010073

[108] Zhong Y, Yu Z, Zhou Z, Lin J, Wang P. Seismic Behaviour of Beam-Connected Precast Walls with Innovative Concealed Steel Bracings: Experimental Insights and Numerical Study. Buildings. 2025;15(24):4559. https://doi.org/10.3390/buildings15244559

[109] Zhao J, Scheel J, Liebscher M, Köberle T, Mechtcherine V. A novel type of mineral-impregnated fibre reinforcements based on alkaline-resistant glass fibre and magnesium oxychloride cement for enhanced sustainability in construction. Journal of Cleaner Production. 2024;446:141355. https://doi.org/10.1016/j.jclepro.2024.141355

[110] Böhm F, Richter K, Risse M. Cascading potential of salvaged rafters from building demolition and deconstruction in southern Germany. Journal of Cleaner Production. 2025;495:144675. https://doi.org/10.1016/j.jclepro.2025.144675

[111] Giorgi S, Atta N, Dalla Valle A, Viscuso S, Lavagna M, Talamo CML. Pilot Projects to Put Reuse and Remanufacturing into Practice in the Tertiary Building Sector. Sustainability. 2025;17(22):10374. https://doi.org/10.3390/su172210374

[112] Vassena GPM, Perfetti L, Comai S, Mastrolembo Ventura S, Ciribini ALC. Construction Progress Monitoring through the Integration of 4D BIM and SLAM-Based Mapping Devices. Buildings. 2023;13(10):2488. https://doi.org/10.3390/buildings13102488

[113] Jayawardana J, Sandanayake M, Jayasinghe J, Kulatunga AK, Zhang G. A comparative life cycle assessment of prefabricated and traditional construction – A case of a developing country. Journal of Building Engineering. 2023;72:106550. https://doi.org/10.1016/j.jobe.2023.106550

[114] Oke AE, Aliu J, Jamir Singh PS, Onajite SA, Kineber AF, Samsurijan MS. Application of Digital Technology Tools for Social and Sustainable Construction in a Developing Economy. Sustainability. 2023;15(23):16378. https://doi.org/10.3390/su152316378

[115] Tinyimana J, Dosumu OS. Quantitative assessment of the barriers to emerging AI tools in the Rwandan construction industry. In: Facilitating inclusivity in multi-, inter-, and transdisciplinary sustainable built environment research in emerging economies. Springer; 2026. p. 37–49. https://doi.org/10.1007/978-3-032-08992-2_4

[116] Loya SO, Eze EC, Awodele IA, Sofolahan O, Omoboye O. Awareness and adoption readiness of machine learning technology in the construction industry of a developing country: a case of Nigeria. Journal of Engineering and Technology for Industrial Applications. 2024;10(47):50–62. https://doi.org/10.5935/jetia.v10i47.1072

[117] Islami RC, Hatmoko JUD, Hermawan F, Sulaiman L, Wulandari M. Issues on the implementation of artificial intelligence (AI) in Indonesia construction projects. Planning Malaysia. 2025;23(4):97–111. https://doi.org/10.21837/pm.v23i38.1781

[118] Vo QB, Vu Dao XN, Nguyen NT, Nguyen THT, Ly HB. Assessing the applicability of international AI practices in construction management: a systematic review with implications for Vietnam. Journal of Science and Transport Technology. 2024;4(4):71–94. https://doi.org/10.58845/jstt.utt.2024.en.4.4.71-94

[119] Flores-Juárez CE, Álvarez-Cedillo JA, Álvarez-Sánchez T, Sarabia-Alonso MT. A study of AI applications in the Mexican architecture, engineering and construction industry: opportunities and challenges. Journal of Hunan University Natural Sciences. 2024;51(11). https://doi.org/10.55463/issn.1674-2974.51.11.5

[120] Moohialdin ASM, Lamari F, Miska M, Trigunarsyah B. Proximity Activity Intensity Identification System in Hot and Humid Weather Conditions: Development and Implementation. Journal of Construction Engineering and Management. 2023;149(12):4023122. https://doi.org/10.1061/JCEMD4.COENG-13332

[121] Badhan SJ, Samsami R. Artificial intelligence (AI) in construction safety: a systematic literature review. Buildings. 2025;15(22):4084. https://doi.org/10.3390/buildings15224084

[122] Liu Z, An Z, Osmani M. Integration of Building Information Modelling with Sport and Facility: Current Status and Future Directions. Buildings. 2023;13(7):1829. https://doi.org/10.3390/buildings13071829

Downloads

Published

2026-11-19

Issue

Section

Articles

Categories

How to Cite

1.
The Digitalisation of Construction (2016–2025): A Critical Narrative Review of BIM, AI, Robotics and Digital Twins: Evidence Maturity, Circular Economy Disconnect and a Research Agenda. Int. J. Archit. Eng. Technol. [Internet]. 2026 Nov. 19 [cited 2026 Nov. 22];13(3):393-416. Available from: https://avantipublishers.com/index.php/ijaet/article/view/1879

Similar Articles

81-84 of 84

You may also start an advanced similarity search for this article.