Keywords
How to Cite
Abstract
Steel tubular bridge pier with inner cruciform plates has high seismic performance. In this paper, the applicability of static-dynamic verification method for seismic design of steel tubular bridge piers with inner cruciform plates is studied. The ultimate strength and state of steel tubular stub columns with inner cruciform plate subjected to compression and bending were investigated through finite element analysis. The validity of the proposed design formula of the failure strain which was obtained from the stub column analysis was examined by analysis on tubular steel bridge piers with inner cruciform plates under cyclic loading. The dynamic response analysis of the same steel bridge piers was carried out on the basis of the spring-mass model and the fiber element model. These results indicated the static-dynamic verification method of the seismic response analysis through the spring-mass model are good agreement with dynamic verification method of seismic response analysis by the fiber element model.References
Usami T, Lu ZH, Ge HB and Kono T. Seismic performance evaluation of steel arch bridges against major earthquakes. Part 1 Dynamic analyses approach. Earthquake Engineering and Structural Dynamics 2004; 3: 1337-1354. http://dx.doi.org/10.1002/eqe.407
Kono T, Ge HB and Usami T. Re-examination of the ultimate strain formula for steel box stub-columns and its application in steel arch bridges. Proceedings of the 6th Symposium on Ductility Design Method for Bridges, Ductility Design Subcommittee, Earthquake Engineering Committee, JSCE, Tokyo, Japan 2003; 323-328.
Iura M, Orino A and Ishizawa T. Elasto-Plastic Behavior of Concrete-Filled Steel Tubular Columns. Journal of Structural Mechanics and Earthquake Engineering, JSCE 2002; No. 696/I-58: 285-298.
Kazuo Chu and Takamasa Sakurai. A Study for Seismic Reinforcement Method on Existing Cylindrical Steel Piers by Weld Rectangular Steel Plates. Journal of structure engineering 2003; 49A: 139-144.
Julia M and Michel B. Cyclic testing of concrete-filled circular steel bridge piers having encased fixed-based detail [J]. Journal of Bridge Engineering ASCE 2004; 9(1): 14-23. http://dx.doi.org/10.1061/(ASCE)1084-0702(2004)9:1(14)
Michel B and Julia M. Seismic design of concrete-filled circular steel bridge piers [J]. Journal of Bridge Engineering, ASCE 2004; 9(1): 24-34. http://dx.doi.org/10.1061/(ASCE)1084-0702(2004)9:1(24)
Yamao T, Iwatsubo K, Itoh M and Matsumura S. Experimental Study on Ductility and Seismic Behavior of Steel Tubular Bridge Piers under Cyclic Loading. Proceedings of the Sixth Pacific Structural Steel Conference, China 2001; 502-507.
Yamao T, Iwatsubo K, Yamamuro T, Ogushi M and Matsumura S. Steel bridge piers with inner cruciform plates under cyclic loading. Thin-Plateed Structures 2002; 40(2): 183-197. http://dx.doi.org/10.1016/S0263-8231(01)00059-3
Wang zhanfei and Yamao T. Ultimate strength and Ductility of Stiffened Steel Tubular Bridge Piers. International Journal of steel structures 2001; 11(1): 81-90.
Japan Road Association. Design Specifications for Highway Bridges, Part V. Seismic Design. Maruzen Co., Ltd, Japan. (in Japanese ) 2002.
Japan Road Association. Design Specifications for Highway Bridges, Part II Steel Bridge. Maruzen Co., Ltd, Japan. (in Japanese ) 2002.
Japan Road Association. Design Specifications for Highway Bridges, Part V Seismic Design. Maruzen Co., Ltd, Japan. (in Japanese ) 2012.
People Republic of China Ministry of Housing and Urban- Rural Development: Code for seismic design of urban bridge (CJJ 166-2011), [M]. Beijing: China Architecture and Building Press. (in Chinese) 2011.
People Republic of China Ministry of Transport. Guidelines for seismic Design of Highway Bridge [M]. Beijing: Communications Press. (in Chinese) 2008.
Caltrans. Bridge Memo to Designers-seismic design Methodology [M], California Department of Transportation, Sacramento 1999.
Caltrans. Seismic Design Criteria [M], Vers.1.0, California Department of Transportation, Sacramento 1999.
John L Bignell, James M LaFave and Neil M Hawkins. Seismic vulnerability assessment of plate pier supported highway bridges using nonlinear pushover analyses. Engineering Structures 27: 2044-2063.
Chopra AK, Goel RK and Chintanapakdee C. Statistics of single-degree-of-freedom estimate of displacement for pushover analyses of buildings. Journal of Structural Engineering (ASCE) 2003; 129: 459-469. http://dx.doi.org/10.1061/(ASCE)0733-9445(2003)129:4(459)
Usami T, Yi Zheng and Hanbin Ge. Seismic Design Method for Thin-Plateed Steel Frame Structures. Journal of Structural Engineering 2001; 127(2): 137-144. http://dx.doi.org/10.1061/(ASCE)0733-9445(2001)127:2(137)
Yi Zheng, Tsutomu Usami and Hanbin Ge. Seismic response predictions of multi-span steel bridges through pushover analysis. Earthquake Engineering and Structural Dynamics 2003; 32: 1259-1274. http://dx.doi.org/10.1002/eqe.272
Zhihao Lu, Tsutomu Usami and Hanbin Ge. Seismic performance evaluation of steel arch bridges against major earthquakes. Part 2: Simplified verification procedure, Earthquake Engineering and Structural Dynamics 2004; 33: 1355-1372. http://dx.doi.org/10.1002/eqe.406
MSC. Software Corporation, User manual Volume A-E. MSC Japan Ltd.. Japan. (in Japanese) 2005.
Usami T. Guidelines for Stability Design of Steel Structures 2nd Edition [M], Japan Society of Civil Engineering, Tokyo (in Japanese) 2005.
Shengbin Gao, Tsutomu Usami and Hanbin Ge. Ductility Of Steel Short Cylinders In Compression And Bending. Journal of Engineering Mechanics 1998; 124(2): 176-183. http://dx.doi.org/10.1061/(ASCE)0733-9399(1998)124:2(176)
Lilya Susanti, Akira Kasai and Yuki Miyamoto. Postbuckling behavior of welded box section steel compression members. International Journal of Civil Engineering and Technology (IJCIET) 2015; 6: 65-78.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright (c) 2016 Wang Zhanfei, Sui Weining, Toshitaka Yamao, Liang Yongqiang