Keywords
Screening
Recycling
Acidic sludge
Used motor oil
How to Cite
Abstract
Used Motor Oils Recycling (UMOR) can be fulfilled in different ways depending on the quality and quantity of the fresh oil and the quality of the collected UMO. The Acidic Sludge (AS) is a byproduct of UMOR with hazardous effects and impacts on the environment. It yields 0.15 of each barrel (220 liters) of UMOR operation. The valid and relevant databases were used to discover the latest reports in managing the AS of UMOR operation. The findings of the current review were oriented towards the physical-chemical backbone of AS and its industrial exploitation. The chemical structure of AS was highlighted by a glance view in the recent reports. To sum up, it was recommended to utilize this valuable byproduct in many industrial applications as an additive.
References
Eving BT, Thompson MA. Dynamic cyclical co-movements of oil prices with industrial production, consumer prices, unemployment, and stock prices. J Energy Policy 2007; 35(11): 5535–5540. https://doi.org/10.1016/j.enpol.2007.05.018.
Hsu YL, Liu CC. Evaluation and selection of waste lubricating oil technology. Environ. Monit. Assess, 2011; 176:1–16. https://doi.org/10.1007/s10661-010-1576-3.
Katiyar V, Husain S. Reclamation of used lubricating oils. Curr. World Environ 2010; 5 (1): 79–84.
Abdel-Jabbar NM, Al Zubaidy EAH. Waste lubricating oil treatment by adsorption process using different adsorbents. World Acad. International Journal of Chemical and Biological Engineering 2010; 3(2): 64–68.
Hani FB, Al-Wedyan H. Regeneration of base-oil from waste-oil under different conditions and variables. Afr. J. Biotechnol 2011; 10 (7): 1150–1153. DOI: 10.5897/AJB10.1791.
Hatami AM, Sabour MR, Amiri A. Recycling process of spent bleaching clay: Optimization by response surface methodology. Global J. Environ. Sci. Manage 2018; 4(1): 9-18. DOI: 10.22034/gjesm.2018.04.01.002.
Rincon J, Canizares P, Garcia M, Gracia I. Regeneration of used lubricant oil by propane extraction. Ind. Eng. Chem. Res 2003; 42: 4867–4873. https://doi.org/10.1021/ie030013w.
Kalnes T. Treatment and recycling of waste lubricants. A petroleum refinery integration study. In: AICHE National Meeting, San Diego, CA, 1990; 19–22.
Hamad A, Al-Zubaidya E, Fayed ME. Used lubricating oil recycling using hydrocarbon solvents. Environ. Manage 2005; 74: 153–159. https://doi.org/10.1016/j.jenvman.2004.09.002.
Ogbeide SO. An investigation to the recycling of spent engine oil. Eng. Sci. Technol. Rev 2010; 3 (1): 23–35.
Bongfa B, Syahrullail S, Hamid MKA, Samin PM, Atuci B, Ajibili HE. Maximizing the Life of Lubricating Oils for Resources and Environmental Sustainability through Quality Monitoring in Service. Indian Journal of Science and Technology 2016; 9(48): 1-10. DOI: 10.17485/ijst/2016/v9iS1/109630.
Syrmanova KK, Kovaleva AY, Kaldybekova ZB, Botabayev NY, Botashev YT, Beloborodov BY. Chemistry and Recycling Technology of Used Motor Oil. Orient. J. Chem 2017; 33(6): 3195-3199. http://dx.doi.org/10.13005/ojc/330665.
Tsai WT. An analysis of used lubricant recycling, energy utilization and its environmental benefit in Taiwan. Energy, 36 (2011) 4333-4339. https://doi.org/10.1016/j.energy.2011.04.008.
Chen X, Xu R, Xu Y, Hu H, Pan S, Pan H. Natural adsorbent based on sawdust for removing impurities in waste lubricants. Journal of Hazardous Materials 350 (2018) 38–45. https://doi.org/10.1016/j.jhazmat.2018.01.057.
Pinheiro CT, Pais RF, Quina MJ, Gando-Ferreira LM. Regeneration of waste lubricant oil with distinct properties by extraction-flocculation using green solvents. Journal of Cleaner Production 200 (2018) 578-587. https://doi.org/10.1016/j.jclepro.2018.07.282.
Aksenov VI, Tsarev NS, Yasnitskaya KV. Treatment of the Combined Sludges of Machine Factories. Procedia Engineering 150 (2016) 2405 – 2408. https://doi.org/10.1016/j.proeng.2016.07.302.
Farzanegan MR, G Markwardt. The effects of oil price shocks on the Iranian economy. Energy economics. 2009; 31(1): 134-151. https://doi.org/10.1016/j.eneco.2008.09.003.
Ahmad I, Khan R, Ishaq M, Khan H, Ismail M, Gul K. Catalytic Pyrolysis of Used Engine Oil over Coal Ash into Fuel-like Products. Energy Fuels 2016; 30: 204−218. https://doi.org/10.1021/acs.energyfuels.5b02316.
Desalegn B, Megharaj M, Chen Z, Naidu R. Green mango peel-nanozerovalent iron activated persulfate oxidation of petroleum hydrocarbons in oil sludge contaminated soil. Environmental Technology & Innovation 11 (2018) 142–152. https://doi.org/10.1016/j.eti.2018.05.007.
Boadu KO, Joel OF, Essumang DK, Evbuomwan BO. A Review of Methods for Removal of Contaminants in Used Lubricating Oil. Chemical Science International Journal 2019; 26(4): 1-11. DOI: 10.9734/CSJI/2019/v26i430101.
Gryazin V, Bagautdinov T, Kozlov K, Belogusev V. Tool for quality control of lubricants. Engineering for rural development 2018; 943-947. DOI: 10.22616/ERDev2018.17.N411.
Oladimeji TE, Sonibare JA, Omoleye JA, Emetere ME, Elehinafe FB. A review on treatment methods of used lubricating oil. International Journal of Civil Engineering and Technology (IJCIET) 2018; 9(12): 506–514. http://eprints.covenantuniversity.edu.ng/id/eprint/13563.
Kavak A, Bilgen G, Mutman U. In-situ modification of a road material using a special polymer. Sci. Res. Essays 2010; 5(17): 2547–2555. https://doi.org/10.5897/SRE.9000583.
Hamidi Y, Sarafi A, Tahmoresi M. Effect of addition bentonite to the rubber tar, 12th National Iranian chemical engineering Congress. 2010.
Hassan Z, Hassan D, Rezvan B, Ali A. Influence of Bentonite Additive on Bitumen and Asphalt Mixture Properties. World Academy of Science, Engineering and Technology 6 (2012) 08-24.
Saleh NJ, Muslim MA. A Study of the Effect of Iraqi Bentonite on Some Properties of Polymeric Blend. Eng & tech 31 (2013) 50-61.
Chen JS, Liao MC, Lin CH. Determination of Polymer Content in Modified Bitumen. Materials and Structures 2003, 36(9), 594-598. https://doi.org/10.1007/BF02483278.
Sengoz B, Isikyakar G. Evaluation of the Properties and Microstructure of SBS and EVA Polymer Modified Bitumen. Construction and Building Materials 2009; 22(9): 1897–1905. https://doi.org/10.1016/j.conbuildmat.2007.07.013.
Hamid B, Hassan Z, Shams N. The Use of Polymer Modification of Bitumen for Durant Hot Asphalt Mixtures. Applied Sciences Research 4 (2008) 96-102.
Kok VB, Akpolat M. Effects of Using Sasobit and SBS on the Engineering Properties of Bitumen and Stone Mastic Asphalt. J. Mater. Civ. Eng 2015; 27(10): 1-7. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001255.
Abtahi S M, Dibaji SHA. Climatic zoning of Isfahan province to use of suitable bitumen based on PG. The 4th National Congress on Civil Engineering, Tehran University, 2008.
Asi IM. Performance evaluation of SUPERPAVE and Marshall Asphalt mix designs to suite Jordan climatic and traffic conditions. Construction and Building Materials 2007; 21(8): 1732–1740. https://doi.org/10.1016/j.conbuildmat.2006.05.036.
Shen J, Amirkhanian S, Tang B. Effects of rejuvenator on performance-based properties of rejuvenated asphalt binder and mixtures. Construction and Building Materials 2007; 21(5): 958–964. https://doi.org/10.1016/j.conbuildmat.2006.03.006.
Stelea L. Present Trends in Improving Quality of Pavement Bitumen. Construction Materials 2007; 4(4): 57-68.
Cutler CJ. Net energy from the extraction of oil and gas in the United States. Energy 2005; 30(5): 769–782. https://doi.org/10.1016/j.energy.2004.05.023.
Bayo-Moriones A, Merino-D-az-de-Cerio J, Escamilla-de-Leo SA, Selvam RM. The impact of ISO 9000 and EFQM on the use of flexible work practices. Int. J. Production Economics 2011; 130(1): 33–42. https://doi.org/10.1016/j.ijpe.2010.10.012.
Hassanpour M. Investigate the feasibility of recycling acidic sludge from used motor oil reprocessing industries to bitumen. Master thesis. Tehran University of Medical Science. 2013; 1-100.
Krajnc D Glavic P. How to compare companies on relevant dimensions of sustainability. Ecological Economics. 2005; 55(4): 551– 563. https://doi.org/10.1016/j.ecolecon.2004.12.011.
Musee N, Lorenzen L, Aldrich C. New methodology for hazardous waste classification using fuzzy set theory: Part I. Knowledge acquisition. Hazard. Mater 2008; 154 (15): 1040–1051. https://doi.org/10.1016/j.jhazmat.2007.11.011.
Hu G, Li J, Zeng G. Recent development in the treatment of oily sludge from petroleum industry: a review. Hazard. Mater 2013; 261(15): 470–490. https://doi.org/10.1016/j.jhazmat.2013.07.069.
Bridjanian H, Sattarin M. Modern recovery methods in used oil re-refining. Pet. Coal 2006; 48 (1): 40–43.
Shishehboran M, Ziari H, Korayem AH, Hajiloo M. Environmental and mechanical impacts of waste incinerated acidic sludge ash as filler in hot mix asphalt. Case Studies in Construction Materials 2012; 14: e00504.
Asgari A, Nabizadeh R, Mahvi AH, Nasseri S, Dehghani MH, Nazmara S, Yaghmaeian K. Biodegradation of total petroleum hydrocarbons from acidic sludge produced by re-refinery industries of waste oil using in-vessel composting. Journal of Environmental Health Science & Engineering (2017) 15(3) 1-9. https://doi.org/10.1186/s40201-017-0267-1.
Hadadi V, Moradi A. A novel method for refining of acidic sludge and mixing with vacuum bottom to improve bitumen properties, Petroleum Science and Technology 2019; 1-12. https://doi.org/10.1080/10916466.2019.1573258
Van Zyl T. Valorisation of Used Automotive Lubrication Oil. Dissertation submitted for the fulfilment of the requirements for the degree Master of Engineering in the Department of Chemical Engineering at Durban University of Technology 2019; 1-100. http://hdl.handle.net/10321/3308.
Small Industries Organization and industrial States of Iran. https://isipo.ir/.
Iranian industries organization website. Evluation of industrial projects. https://teh.mimt.gov.ir/.
Charpentier J.-C. In the Framework of Global Trade, Sustainability and Industry Demand for Innovative Process and Technologies, what kind of Modern “Green” Chemical Engineering is required for the Design of “the Factory of the Future”? International Journal of Petroleum Technology 2019; 6(1): 7–29. https://doi.org/10.15377/2409-787x.2019.06.2.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright (c) 2020 Malek Hassanpour