Fiber Types, Properties, and Vibration Effects in Fiber-Reinforced and Ultra-High Performance Concrete: A Review

Authors

  • Abu B. Conteh Department of Civil and Environmental Engineering, Syracuse University, Syracuse, NY 13244-1240, USA
  • Eric M. Lui Department of Civil and Environmental Engineering, Syracuse University, Syracuse, NY 13244-1240, USA

DOI:

https://doi.org/10.15377/2409-9821.2026.13.15

Keywords:

Vibration effects, Sampling methods, Fiber-reinforced concrete, Fiber types and properties, Ultra-high performance concrete

Abstract

This paper presents an overview of the different types, geometries and important characteristics of fibers that have been used or proposed for use in fiber-reinforced concrete (FRC) and ultra-high performance concrete (UHPC). The effects of these fibers on the mechanical properties, durability and workability of FRC and UHPC are then outlined. While the addition of the proper amount of fibers has the beneficial effect of enhancing the material properties and durability of concrete, challenges such as cost, need for more stringent quality control, issues with mixability and workability, and the use of proper vibration during the mixing and pouring phases need to be addressed. Insufficient vibration can lead to voids, reduce fiber dispersion, and weaken the concrete. Conversely, excessive vibration can cause segregation and fiber misalignment, thereby compromising the structural integrity of the final product. Based on a critical review of existing literature, four areas of further research have been identified. They are: (1) determining the optimal dosage of fibers given their types, geometries and intended applications, (2) identifying the most efficient method to enhance mix workability for a given fiber type, geometry, and volume fraction, (3) correlating vibration parameters such as vibration time, frequency and amplitude with the mechanical properties of FRC and UHPC, (4) incorporating other advanced technologies such as artificial intelligence and multiscale modeling techniques to gain a better understanding of how fiber alignment, distribution, pore structure, and interfacial interaction between fibers and matrix affect the mechanical performance, ductility and durability of FRC and UHPC.

References

[1] Romualdi JP, Batson GB. Mechanics of crack arrest in concrete. Proceedings of the American Society of Civil Engineers. 1963; 89(EM3):147-168.

[2] Romualdi JP, Mandel JA. Tensile strength of concrete affected by uniformly distributed closely spaced short lengths of wire reinforcement. ACI Journal Proceedings. 1964; 61(6): 657-671.

[3] Afroughsabet TV, Biolzi L, Ozbakkaloglu T. High-performance fiber-reinforced concrete: A review. Journal of Materials Science. 2016; 51(4): 1-35. https://doi.org/10.1007/s10853-016-9917-4

[4] Isabai B, Nurzhan S, Yerlan A. Strength properties of various types of fiber-reinforced concrete for production of driven piles Buildings. 2023; 13(7): 1733. https://doi.org/10.3390/buildings13071733

[5] ACI 544.1R-96. Report on Fiber Reinforced Concrete (Reapproved 2009). American Concrete Institute, Farmington Hills, MI; 2009.

[6] Gouri ML, Nazeer M, Nizad A, Suresh S. Fiber Reinforced Concrete – A State-of-the-art Review. ACSGE-2009, Oct 25-27, 2009; BITS Pilani India, 9p.

[7] Hassan SKH, Abdel-Jaber MS, Alqam M. Rehabilitation of Reinforced Concrete Deep Beams Using Carbon Fiber Reinforced Polymers (CFRP). Modern Applied Science. 2018; 12(8): 179-194. https://doi.org/10.5539/mas.v12n8p179

[8] fib. Fibre Reinforced Concrete – State of the Art Report (Bulletin No. 105). fib International. 2022. https://www.fib-international.org/publications/fib-bulletins/fibre-reinforced-concrete-em-pdf-em-detail.html

[9] Grija S, Shanthini D, Abinaya S. (2016). A review on fiber reinforced concrete. International Journal of Civil Engineering and Technology (IJCIET). 2016; 7(6): 386-392. http://www.iaeme.com/IJCIET/issues.asp?JType=IJCIET&VType=7&IType=6

[10] Mohod MV. Performance of steel fiber reinforced concrete. International Journal of Engineering and Science. 2012; 1(12): 1-4.

[11] Anas M, Khan M, Bilal H, Jadoon S, Khan N. Fiber Reinforced Concrete: A Review. Engineering Proceedings. 2022; 22(1): 3. https://doi.org/10.3390/engproc2022022003

[12] Parameswaran VS, Krishnamoorthy TS, Balasubramanian K. Current Research and Applications of Fiber Reinforced Concrete Composites in India. Transportation Research Record. 2014; 1226: 6p. https://onlinepubs.trb.org/Onlinepubs/trr/1989/1226/1226-001.pdf

[13] FHWA-HRT-13-060. Ultra-High Performance Concrete: A State-of-the-Art Report for the Bridge Community. US Department of Transportation. Federal Highway Administration; 2013.

[14] ACI PRC-239-18. Ultra-High Performance Concrete: An Emerging Technology Report. American Concrete Institute, Farmington Hills, MI; 2018.

[15] Akeed MH, Qaidi S, Ahmed HU, Faraj RH, Majeed SS, Mohammed AS, Emad W, Tayeh BA, Azevedo ARG. Ultra-high-performance fiber-reinforced concrete. Part V: Mixture design preparation mixing casting and curing. Case Studies in Construction Materials. 2022; 17: e01363. https://doi.org/10.1016/j.cscm.2022.e01363

[16] Lassy B, Hain A. Ultra-High Performance Concrete Invert Linings. Structure. NCEA/CASE/SEI October, 2025; 15-17. https://wwWstructuremaGorg/article/ultra-high-performance-concreteinvert-linings/ (Accessed on Aug 12, 2026)

[17] Ravichandran D, Premp R, Kaliyavaradhan SK, Ambily PS (2022). Influence of fibers on fresh and hardened properties of Ultra-High-Performance Concrete (UHPC)-A review. Journal of Building Engineering. 2022; 57(1): 104922. https://doi.org/10.1016/JjobE2022.104922

[18] ACI 544.2R-17. Report on the Measurement of Fresh State Properties and Fiber Dispersion of Fiber-Reinforced Concrete. American Concrete Institute, Farmington Hills, MI; 2017.

[19] ACI 544.2R-89. Measurement of Properties of Fiber Reinforced Concrete (Reapproved 1999). American Concrete Institute, Farmington Hills, MI; 1999.

[20] ACI 544.4R-18. Guide to Design with Fiber-Reinforced Concrete. American Concrete Institute, Farmington Hills, MI; 2018.

[21] ASTM C1116/C1116M-23. Standard Specification for Fiber-Reinforced Concrete American Society for Testing and Materials International, West Conshohocken, PA; 2023.

[22] AASHTO. Guide Specifications for Structural Design with Ultra-High Performance Concrete, 1st Edition. The American Association of State Highway and Transportation; 2024.

[23] Feng ZG, Gong X, Li X, Cui Q, Yao D. Mechanical Properties and Durability of High Toughness Concrete (HTC) Modified by EVA and SB Latex Powder. Journal of Testing and Evaluation. 2024; 52(1): 446–459. https://doi.org/10.1520/JTE20230194

[24] Ghanem SY, Bowling J (2019). Mechanical Properties of Carbon Fiber Reinforced Concrete. Advances in Civil Engineering Materials. 2019; 8(3): 20180089. https://doi.org/10.1520/ACEM20180089

[25] Zollo RF. Fiber-reinforced concrete: An overview after 30 years of development. Cement and Concrete Composites. 1997; 19(2): 107-122. https://doi.org/10.1016/S0958-9465(96)00046-7

[26] ACI PRC-544.1R-96. Report on Fiber Reinforced Concrete (Reapproved 2023). American Concrete Institute, Farmington Hills, MI; 2023.

[27] Khan IU, Gul A, Khan K, Akbar S, Irfanullah. Mechanical Properties of Steel-Fiber-Reinforced Concrete. Engineering Proceedings. 2022; 22(6): 7p. https://doi.org/10.3390/engproc2022022006

[28] Ahmad J, González-Lezcano RA, Majdi A, Ben Kahla N, Deifalla AF, El-Shorbagy MA. Glass Fibers Reinforced Concrete: Overview on Mechanical Durability and Microstructure Analysis. Materials. 2022;15(15): 5111. https://doi.org/10.3390/ma15155111

[29] Newcomb BA, Chae HG. The properties of carbon fibers in Handbook of Properties of Textile and Technical Fibres. 2nd Edition. Anthony R Bunsell (editor), Woodhead Publishing. 2018; 841-871. https://doi.org/10.1016/B978-0-08-101272-7.00021-3

[30] Chen L, Chen Z, Xie Z, Wei L, Hua J, Huang L, Yap PS. Recent developments on natural fiber concrete: A review of properties sustainability applications barriers and opportunities. Developments in the Built Environment. 2023; 16: 100255. https://doi.org/10.1016/Jdibe.2023.100255

[31] Song H, Liu T, Gauvin F, Brouwers HJH. (2024). Evaluation of zirconia modification on the durability of natural fiber-reinforced cement composites using accelerated aging. Journal of Building Engineering. 2024; 84: 108632. https://doi.org/10.1016/j.jobe.2024.108632

[32] Bhaladhare BR, Hadge PN, Dahikar MA, Dhore TT, Chaudhary VP, Lanjewar PS. Review on Fibre Reinforced Concrete – A Case Study. International Research Journal of Engineering and Technology (IRJET). 2020; 7(9): e-ISSN: 2395-0056.

[33] ASTM A820/A820M-22. Standard Specification for Steel Fibers for Fiber-Reinforced Concrete American Society for Testing and Materials International, West Conshohocken, PA; 2022.

[34] Wadekar AP, Pandit RD. Study of different types fibres used in high strength fibre reinforced concrete. International Journal of Innovative Research and Advanced Engineering. 2014; 1(9): 225-230.

[35] Pathan G, Swarup A. A review on steel fiber reinforced concrete. International Journal of Advanced Research in Science and Engineering. 2017; 6(1). https://doi.org/10.5281/zenodo.233321.

[36] Jhatial A, Sohu S, Bhatti N, Lakhiar MT, Oad R. Effect of steel fibres on the compressive and flexural strength of concrete. International Journal of Advanced Applied Sciences. 2018; 5(10): 16-21. https://doi.org/10.21833/ijaas.2018.10.003.

[37] Krishna BV, Rao MK. A comparative and experimental study on the mechanical properties of various steel and glass fiber reinforced high strength concrete. International Research Journal of Engineering and Technology. 2015; 2: 129-133.

[38] Kaźmierowski M, Jaskulski R, Drzazga M, Nalepka M, Kordasz M (2024) Effects of the addition of short straight steel fibers on the strength and strains of high-strength concrete during compression. Scientific Reports. 2024; 14: 6989. https://doi.org/10.1038/s41598-024-57574-1.

[39] Joshi A, Reddy P, Kumar P, Hatker P. Experimental work on steel fibre reinforced concrete. International Journal of Scientific. Engineering Research. 2016; 7(10): 971-981.

[40] Alwan JM, Naaman AE, Guerrero P. Effect of mechanical clamping on the pull-out response of hooked steel fibers embedded in cementitious matrices. Concrete Science and Engineering. 1999; 1(1): 15-25.

[41] Shin HO, Kim K, Oh T, Yoo DY (2021). Effects of fiber type and specimen thickness on flexural behavior of ultra-high-performance fiber-reinforced concrete subjected to uniaxial and biaxial stresses. Case Studies in Construction Materials. 2021; 15: e00726. https://doi.org/10.1016/j.cscm.2021.e00726.

[42] Kim JJ, Yoo DY, Banthia N. Benefits of curvilinear straight steel fibers on the rate-dependent pullout resistance of ultra-high-performance concrete. Cement and Concrete Composites. 2021; 118: 103965. https://doi.org/10.1016/j.cemconcomp.2021.103965

[43] Buttignol TET, Sousa JLAO, Bittencourt TN. Ultra-high-performance fiber-reinforced concrete (UHPFRC): A review of material properties and design procedures. IBRACON Structures and Materials Journal. 2017; 10(4): 957-971. https://doi.org/10.1590/S1983-41952017000400011

[44] AGY. High Strength Glass Fibers: An Overview of Glass Fiber Technology. AGY Strength in Material. Technical Paper; 2021.

[45] ASTM C162-23. Standard Terminology of Glass and Glass Products. American Society for Testing and Materials International, West Conshohocken, PA; 2023.

[46] Hrynyk TD, Vecchio FJ. Behavior of Steel Fiber-Reinforced Concrete Slabs under Impact Load. ACI Structural Journal. 2014; 111(5):1213-1224. https://doi.org/10.14359/5168692

[47] Gao D, Huang Y, Yuan J, Gu Z. Probability distribution of bond efficiency of steel fiber in tensile zone of reinforced concrete beams. Journal of Building Engineering. 2021; 43: 102550. https://doi.org/10.1016/j.jobe.2021.102550

[48] Bishetti P. Glass Fiber Reinforced Concrete. International Journal of Civil Engineering. 2019; 6(6): 23-26. https://doi.org/10.14445/23488352/IJCE-V6I6P105

[49] Arunakanthi E, Kumar JDC. Experimental studies on fiber reinforced concrete (FRC). International Journal of Civil Engineering and Technology. 2016; 7(5): 329-336. http://www.iaemEcom/IJCIET/indeXasp

[50] Khan MI, Umair M, Shaker K, Basit A, Nawab Y, Kashif M. Impact of waste fibers on the mechanical performance of concrete composites. The Journal of Textile Institute. 2020; 111(5): 1632-1640. https://doi.org/10.1080/00405000.2020.1736423

[51] Wang Q, Song H, Li Y, Wang F, Hu Z, Lou S, Shi Z. Experimental study on the performance of graded glass fiber reinforced concrete (G-GRC) based on engineering application. Materials. 2021; 14(5): 1149. https://doi.org/10.3390/ma14051149.

[52] Erlin B. Embedded metals and materials other than reinforcing steel. In ASTM International STP 169D Significance of Tests and Properties of Concrete and Concrete-Making Materials (Edited by Lamond JF and Pielert JH. 664 p). ASTM International, West Conshohocken, PA; 2006.

[53] Nevsky A, Kudyakov K, Danke I, Kudyakov A, Kudyakov V. Improvement of cement concrete strength properties by carbon fiber additives. AIP Conference Proceedings. 2016; 1698(1): 070005. https://doi.org/10.1063/1.4937875

[54] Breña SF, Bramblett RM, Benouaich MA, Wood SL, Kreger ME. Use of Carbon Fiber Reinforced Polymer Composites to Increase the Flexural Capacity of Reinforced Concrete Beams. Texas Department of Transportation, Austin, TX; 2001.

[55] Qiu Y, Zhou C. Analytical model of large-scale circular concrete columns confined by pre-stressed carbon fibre reinforced polymer composites under axial compression. Structural and Infrastructure Engineering. 2020; 17: 1062-1075. https://doi.org/10.1080/15732479.2020.1790015

[56] Aljalawi NMF, Al-Jelawy HM. Possibility of Using Concrete Reinforced by Carbon Fibre in Construction. International Journal of Engineering Technology. 2018; 7(4.20): 449-452. https://doi.org/10.14419/ijet.v7i4.20.26241

[57] Hassan HZ, Saeed NM. Fiber reinforced concrete: a state of the art. Discover Materials. 2024; 4:101. https://doi.org/10.1007/s43939-024-00171-w

[58] Chung DDL. Carbon Fiber Reinforced Concrete. Strategic Highway Research Program, Washington, DC; 1992.

[59] Li YF, Li JY, Ramanathan GK, Chang SM, Shen M-Y Tsai YK, Huang CH. An Experimental Study on Mechanical Behaviors of Carbon Fiber and Microwave-Assisted Pyrolysis Recycled Carbon Fiber-Reinforced Concrete. Sustainability. 2021; 13: 6829. https://doi.org/10.3390/su13126829

[60] Atiyeh M, Aydin E. Carbon-Fiber Enriched Cement-Based Composites for Better Sustainability. Materials. 2020; 13(8): 1899. https://doi.org/10.3390/ma13081899

[61] Baldenebro-López FJ, Castorena-González JH, Velázquez-Dímas JI, Ledezma-Sillas J, Gómez-Esparza C, Martínez-Sánchez R, Herrera-Ramírez J. Influence of continuous plastic fibers reinforcement arrangement in concrete strengthened. International Organization of Scientific Research (IOSR) Journal of Engineering. 2014; 4(4): 15-23. https://doi.org/10.9790/3021-04411523

[62] Mistry M, Rane G. Effect of PET bottle pieces and waste wrapper fibers on concrete compressive strength. Materials Science and Engineering. 2021; 1116: 012156. https://doi.org/10.1088/1757-899X/1116/1/012156

[63] Nibudey RN, Nagarnaik PB, Parbat DK, Pande AM. Strengths prediction of plastic fiber reinforced concrete (M30). International Journal of Engineering Research Applications. 2013; 3(1): 1818-1825.

[64] Khodadadi N, Roghani H, Harati E, Mirdarsoltany M, De Caso F, Nanni A. Fiber-reinforced polymer (FRP) in concrete: A comprehensive survey. Construction and Building Materials. 2024; 432: 136634. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2024.136634

[65] Bheel N, Sohu S, Awoyera P, Kumar A, Abbasi SA, Olalusi OB. Effect of Wheat Straw Ash on Fresh and Hardened Concrete Reinforced with Jute Fiber. Advances in Civil Engineering. 2021; 2021(4): 1-11. https://doi.org/10.1155/2021/6659125

[66] Kandasamy R, Murugesan R. Fibre Reinforced Concrete Using Domestic Waste Plastics as Fibres. ARPN Journal of Engineering and Applied Sciences. 2011; 6(3): 75-82.

[67] Amancio FA, de Carvalho Rafael MF, de Oliveira Dias AR, Bezerra Cabral AE. Behavior of concrete reinforced with polypropylene fiber exposed to high temperatures. Procedia Structural Integrity. 2018; 11: 91-98. https://doi.org/10.1016/j.prostr.2018.11.013

[68] Liang N, Ren L, Tian S, Liu X, Zhong Z, Deng Z, Yan R. Study on the Fracture Toughness of Polypropylene–Basalt Fiber-Reinforced Concrete. International Journal of Concrete Structures and Materials. 2021; 15(35). https://doi.org/10.1186/s40069-021-00472-x

[69] Gore PM, Kandasubramanian B. Functionalized Aramid Fibers and Composites for Protective Applications: A Review. Industrial Engineering Chemistry Research. 2018; 57(49): 16537–16563. https://doi.org/10.1021/acs.iecr.8b04903.

[70] Farooqi MU, Ali M. Effect of Fibre Content on Compressive Strength of Wheat Straw Reinforced Concrete for Pavement Applications. IOP Conference Series: Materials Science and Engineering. 2018; 422: 012014. https://doi.org/10.1088/1757-899X/422/1/012014

[71] Wang G, Han Y. Research on the performance of straw fiber concrete. Materials Science and Engineering. 2018; 394: 032080. https://doi.org/10.1088/1757-899X/394/3/032080

[72] Onésippe C, Passe-Coutrin N, Toro F, Delvasto S, Bilba K, Arsène M-A. Sugarcane bagasse fibres reinforced cement composites: Thermal considerations. Composites Part A: Applied Science and Manufacturing. 2010; 41(4): 549-556. https://doi.org/10.1016/j.compositesa.2010.01.002.

[73] Gebreyouhannes E, Geremew M. Sugarcane Bagasse Ash as a Partial Substitute of Cement in Concrete Rigid Pavement. 2020. Retrieved from https://www.researchgate.net/publication/344493275_Sugarcane_Bagasse_Ash_as_a_Partial_Substitute_of_Cement_in_Concrete_Rigid_Pavement (Accessed on August 11, 2026). https://doi.org/10.13140/RG2.2.11260.16009

[74] Bilba K, Arsene M-A, Ouensanga A. Sugar cane bagasse fibre reinforced cement composites. Part I Influence of the botanical components of bagasse on the setting of bagasse/cement composite. Cement and Concrete Composites. 2003; 25(1): 91-96. https://doi.org/10.1016/S0958-9465(02)00003-3

[75] Ghazali MJ, Azhari CH, Abdullah S, Omar MZ. Characterisation of Natural Fibres (Sugarcane Bagasse) in Cement Composites. In Proceedings of the World Congress on Engineering 2008, July 2-4 (Vol. II, WCE 2008). London, UK, 2008; 3p.

[76] Kumar D, Babu NV. Study on Properties of Sisal Fiber Reinforced Concrete by Adding of Different Percentages and Different Sizes of Sisal Fiber. International Journal of Management Technology and Engineering. 2018; 8: 2466.

[77] Swaminathan V. Sisal fiber reinforced concrete. Journal of Emerging Technologies and Innovative Research (JETIR). 2018; 5(6): 65-69.

[78] Rahuman A, Yeshika S. Study on properties of sisal fiber reinforced concrete with different mix proportions and different percentage of fiber addition. International Journal of Research in Engineering and Technology. 2015; 4(3): 474-477. https://doi.org/10.15623/ijret.2015.0403080

[79] Mbereyaho L, Twayigize F, Ishimwe LGM, Mutumwinka S. Experimental investigation on the potentials of Sisal Fibres as Reinforcements for Drainage Concrete Cover Plates. Rwanda Journal of Engineering Science Technology and Environment. 2020; 3(1): 12p. https://doi.org/10.4314/rjeste.v3i1.9

[80] Salih YA, Sabeeh NN, Yass MF, Ahmed AS, Khudhurr ES. Concrete beams strengthened with jute fibers. Civil Engineering Journal. 2019; 5(4): 767-776. https://doi.org/10.28991/cej-2019-03091286.

[81] Bharathi Murugan R, Gayke A, Natarajan C, Haridharan MK, Murali G, Parthiban K. Influence of Treated Natural Jute Fiber on Flexural Properties of Reinforced Concrete Beams. International Journal of Engineering and Technology. 2018; 7(3.12):148-152. https://doi.org/10.14419/ijet.v7i3.12.15906

[82] Bilal M. Investigation of Jute Fiber Reinforced Concrete Having GFRP Rebars in Slabs Under Impact Loading (Doctoral dissertation). Capital University, Jhumri Telaiya, India; 2020.

[83] Tiwari S, Sahu AK, Pathak RP. Mechanical Properties and Durability Study of Jute Fiber Reinforced Concrete. Materials Science and Engineering. 2020; 961: 012009. https://doi.org/10.108/1757-899X/961/1/012009

[84] Aryanto Y, Wariyatno NG, Hu H-T, Han AL, Hidayat BA. Investigation on Structural Behavior of Bamboo Reinforced Concrete Slabs under Concentrated Load. Sains Malaysiana. 2021; 50(1): 227-238. https://doi.org/10.17576/jsm-2021-5001-22

[85] Giancaspro JW. Influence of Reinforcement Type on the Mechanical Behavior and Fire Response of Hybrid Composites and Sandwich Structures (Doctoral dissertation). Rutgers, The State University of New Jersey-New Brunswick, 2004.

[86] Wei B, Cao H, Song S. Tensile behavior contrast of basalt and glass fibers after chemical treatment. Materials Design. 2010; 31(9): 4244-4250. https://doi.org/10.1016/j.matdes.2010.04.009

[87] Militky J, Kovačič, V, Rubnerova J. Influence of thermal treatment on tensile failure of basalt fibers. Engineering Fracture Mechanics. 2002; 69(9): 1025-1033. https://doi.org/10.1016/S0013-7944(01)00119-9

[88] Mittal G, Rhee KY, Mišković-Stanković, V, Hui D. Reinforcements in multi-scale polymer composites: Processing properties and applications. Composites Part B: Engineering. 2018; 138: 122-139. https://doi.org/10.1016/j.compositesb.2017.11.028.

[89] Banerji S, Kodur VS. Effect of temperature on mechanical properties of ultra-high-performance concrete. Fire and Materials. 2021; 46(1): 287-301. https://doi.org/10.1002/fam.2979.

[90] Banthia N, Majdzadeh F, Wu J, Bindiganavile V. Fiber synergy in Hybrid Fiber Reinforced Concrete (HyFRC) in flexure and direct shear. Cement and Concrete Composites. 2014; 48: 91-97. https://doi.org/10.1016/j.cemconcomp.2013.10.018

[91] Li Y, Tan KH, Yang EH. Synergistic effects of hybrid polypropylene and steel fibers on explosive spalling prevention of ultra-high performance concrete at elevated temperature. Cement and Concrete Composites. 2019; 96: 174-181. https://doi.org/10.1016/j.cemconcomp.2018.11.009

[92] Wei J, Breña S, Ritchie C, More HB. Ultra-High Performance Concrete Reinforced with Multi-Scale Hybrid Fibers and Its Durability-Related Properties: Final Report. Report No. 23-048. Massachusetts Department of Transportation, Office of Transportation Planning, Boston, MA; 2023.

[93] Kanchidurai S, Madhumithra. E, Jaishankar P, Shivani R, Rithani M. Experimental Investigation on Hybrid Fibre-Reinforced Concrete (HFRC) Fracture Toughness and Impact Resistance with Partial Replacement of Nano-Silica. Materials Today: Proceedings 106. 2024: 75-83. https://doi.org/10.1016/j.matpr.2023.05.359

[94] Pourjahanshahi A, Madani H. Chloride diffusivity and mechanical performance of UHPC with hybrid fibers under heat treatment regime. Materials Today Communications. 2021; 26: 102146. https://doi.org/10.1016/j.mtcomm.2021.102146

[95] Park JJ, Yoo DY, Kim S, Kim SW. Benefits of synthetic fibers on the residual mechanical performance of UHPFRC after exposure to ISO standard fire. Cement and Concrete Composites. 2019; 104: 103401. https://doi.org/10.1016/j.cemconcomp.2019.103401

[96] Chun B, Yoo DY. Hybrid effect of macro and micro steel fibers on the pullout and tensile behaviors of ultra-high-performance concrete. Composites Part B: Engineering. 2019; 162: 344-360. https://doi.org/10.1016/j.compositesb.2018.11.026

[97] Yoo DY, Kim MJ. High energy absorbent ultra-high-performance concrete with hybrid steel and polyethylene fibers. Construction and Building Materials. 2019; 209: 354-363. https://doi.org/10.1016/j.conbuildmat.2019.03.096

[98] Feng L, Xie N, Zhong J. Carbon nanofibers and their composites: A review of synthesizing properties and applications. Materials. 2014; 7: 3919-3945. https://doi.org/10.3390/ma7053919

[99] Yadav D, Amini F, Ehrmann A. Recent advances in carbon nanofibers and their applications – A review. European Polymer Journal. 2020; 138: 109963. https://doi.org/10.1016/j.eurpolymj.2020.109963

[100] Metaxa ZS, Konsta-Gdoutos MS, Shah SP. Carbon nanofiber-reinforced cement-based materials. Transportation Research Record: Journal of the Transportation Research Board No. 2142. Transportation Research Board of the National Academies. Washington DC. 2010: 114–118. https://doi.org/10.3141/2142-17

[101] Wang T, Xu J, Meng B, Peng G. Experimental study on the effect of carbon nanofiber content on the durability of concrete. Construction and Building Materials. 2020; 250: 118891. https://doi.org/10.1016/j.conbuildmat.2020.118891

[102] Cui K, Chang J, Feo L, Chow CL, Lau D. Developments and applications of carbon nanotube reinforced cement-based composites as functional building materials. Frontiers in Materials. 2022; 9: 861646. https://doi.org/10.3389/fmats.2022.861646

[103] Du Y, Wang Z, Lu S, Huang H. Mechanical characteristics of multi-scale carbon nanotube-carbon fiber reinforced concrete and a dynamic constitutive model within an EP damage framework. Case Studies in Construction Materials. 2025; 23: e05616. https://doi.org/10.1016/j.cscm.2025.e05616

[104] Jiao L, Su M, Chen L, Wang Y, Zhu H, Dai H. Natural cellulose nanofibers as sustainable enhancers in construction cement. PLOS One; 2016. https://doi.org/10.1371/journal.pone.0168422.

[105] Rajendran N, Runge T, Bergman RD, Nepal P, Nair N, Ashraf W. Economic and environmental impact analysis of cellulose nanofiber-reinforced concrete mixture production. Resources Conservation Recycling. 2025; 212: 107917. https://doi.org/10.1016/j.resconrec.2024.107917.

[106] da Silva Neto JT, Soares Jr., PRR, Reis ED, Maciel Pd.S, Gomes PCC, Gouveia AMC, Bezerra ACdS. Fiber-reinforced cementitious composites: recent advances and future perspectives on key properties for high-performance design. Discover Civil Engineering. 2025; 2:65. https://doi.org/10.1007/s44290-025-00209-9

[107] Suksiripattanapong C, Phetprapai T, Singsang W, Phetchuay C, Thumrongvui J, Tabyang W. Utilization of Recycled Plastic Waste in Fiber Reinforced Concrete for Eco-Friendly Footpath and Pavement Applications. Sustainability. 2022; 14, 6839. https://doi.org/10.3390/su14116839

[108] Pham TM. Fibre-Reinforced Concrete: State-of-the-Art-Review on Bridging Mechanism Mechanical Properties Durability and Eco-economic Analysis. Case Studies in Construction Materials. 2025; 22: e04574. https://doi.org/10.1016/j.cscm.2025.e04574

[109] Wang XQ, Chow CL, Lau D. Multiscale Perspectives for Advancing Sustainability in Fiber Reinforced Ultra-High Performance Concrete. Materials Sustainability. 2024; 2,13. https://doi.org/10.1038/s44296-024-00021-z

[110] Khaleel BA, Dawood ET. Evolution of Ultra High Performance Concrete Using Hybrid Fibers: A Review. Discover Concrete and Cement. 2025; 1:2. https://doi.org/10.1007/s44416-025-00001-z

[111] Bai G, Chen G, Li R, Wang L, Ma G. 3D Printed Ultra-High Performance Concrete: Preparation Application and Challenges. Nanotechnology in Construction and Circular Economy Lecture Notes in Civil Engineering. 2023; 356. https://doi.org/10.1007/978-981-99-3330-3_8

[112] Liu CJ, Xin H, Deng XW, Wu YY, Zheng ZL, Liu J, Hui D. Application of Nanomaterials in Ultra-High Performance Concrete: A Review. Nanotechnology Reviews. 2020; 9: 1427-1444. https://doi.org/10.1515/ntev-2020-0107

[113] Yoo DY, Taekgeun O, Banthia N. Nanomaterials in Ultra-High-Performance-Concrete (UHPC) – A Review. Cement and Concrete Composites. 2022; 134(7): 104730. https://doi.org/10.1016/j.cemconcomp.2022.104730

[114] Zaid O, Hashmi S RZ, El Ouni MH, Martinez-Garcia R, de Prado-Gil J, Yousef S EAS. Experimental and Analytical Study of Ultra-High-Performance Fiber-Reinforced Concrete Modified with Egg Shell Powder and Nano-Silica. Journal of Materials Research and Technology. 2023; 24: 7162-7188. https://doi.org/10.1016/j.jmrt.2023.04.240

[115] Farahzadi L, Nia SB, Shafei B, Kioumarsi M. Sustainability Assessment of Ultra-High Performance Concrete Made with Various Supplementary Cementitious Materials. Cleaner Materials. 2025; 15: 100301. https://doi.org/10.1016/j.clema.2025.100301

[116] Khayat KH, Roussel Y. Testing and Performance of Fiber-Reinforced Self-Consolidating Concrete. Materials and Structures. 2000; 33: 391-397.

[117] Khayat KH, Kassimi F, Ghoddousi P. Mixture Design and Testing of Fiber-Reinforced Self-Consolidating Concrete. ACI Materials Journal. 2014; 111(2): 143-152. https://doi.org/10.14359/51686722

[118] Robins PJ, Austin SA. Melt Extract Fibre Reinforced Sprayed Concrete. In: Composite Structures 3 (Edited by Marshall IH). Springer Dordrecht; 1985. https://doi.org/10.1007/978-94-009-4952-2_18.

[119] Fladr J, Bily P. Specimen size effect on compressive and flexural strength of high-strength fiber-reinforced concrete containing coarse aggregate. Composites Part B: Engineering. 2018; 138: 77-86. https://doi.org/10.1016/j.compositesb.2017.11.032

[120] Ramakrishnan V, Wu GY, Hosalli G. Flexural behavior and toughness of fiber reinforced concretes. Transportation Research Record. 1989; 1226: 69-77.

[121] Soroushian P, Bayasi Z. Fiber-type effect on the performance of steel fiber reinforced concrete. ACI Materials Journal. 1991; 88(2): 129-134. https://www.concrete.org/publications/acimaterialsjournal.aspx

[122] Khan MI, Abbas YM. Significance of Fiber Characteristics on the Mechanical Properties of Steel Fiber-Reinforced High-Strength Concrete at Different Water-Cement Ratios Construction and Building Materials. 2023; 408: 133742. https://doi.org/10.1016/j.conbuildmat.2023.133742

[123] Dayaa L, Assaad J, Khatib J. Effect of Volume Fraction and Orientation of Steel Fiber on The Structural Performance of Normal Strength Reinforced Concrete Beams. Steps for Civil Construction and Environmental Engineering. 2024; 2(4): 1-13. https://doi.org/10.61706/sccee12011135.

[124] Zhang H, Zhu LM, Zhang F, Yang MJ. Effect of Fiber Content and Alignment on the Mechanical Properties of 3D Printing. Cementitious Composites Materials. 2021; 14(9): 2223. https://doi.org/10.3390/ma14092223

[125] News Room. A Fiber reinforced concrete testing primer ready mix professionals (Part 1). Copyright 2023 ABC Polymer Industries LLC; March 18. 2015. https://abcpolymerindustries.com/news-room/ (Accessed on August 13, 2026)

[126] Gencel O, Brostow W, Datashvili T, Thedford M. Workability and Mechanical Performance of Steel Fiber-Reinforced Self-Compacting Concrete with Fly Ash. Composite Interfaces. 2011; 18(2): 169-184. https://doi.org/10.1163/092764411X567567

[127] Mehdipour I, Libre N A, Shekarchi M, Khanjani M. Effect of workability characteristics on the hardened performance of FRSCCMs. Construction and Building Materials. 2013; 40: 611-621. https://doi.org/10.1016/j.conbuildmat.2012.11.051

[128] Abbas S, Soliman AM, Nehdi ML. Exploring mechanical and durability properties of ultra-high performance concrete incorporating various steel fiber lengths and dosages. Construction and Building Materials. 2015; 75: 429-441. https://doi.org/10.1016/j.conbuildmat.2014.11.017

[129] Jassim DHM, Anwar AG. Experimental Study of Polypropylene Fiber-Reinforced Concrete. International Journal of Research Development in Engineering Science Management. 2016; 4(3): 149-161.

[130] Sudarshan NM, Rao TC. Vibration Impact on Fresh Concrete of Conventional and UHPFRC International Journal of Applied Engineering Research. 2017; 12(8): 1683-1690.

[131] ACPA. R&T Update Concrete Pavement and Research Technology. No. 4.05. American Concrete Pavement Association; 2003.

[132] Chatterji S. Freezing of Air-Entrained Cement-based Materials and Specific Actions of Air-Entraining Agents. Cement Concrete Composites. 2004; 25(7): 759-765. https://doi.org/10.1016/S0958-9465(02)00099-9

[133] Lamond JF, Pielert JH. Significance of Tests and Properties of Concrete and Concrete-Making Materials. ASTM International 2006 - Technology Engineering. 664p; 2006.

[134] Whiting DA, Nagi MA. Manual on control of air content in concrete. Portland Cement Association, Skokie, IL; 1998.

[135] Ozyildirim C, Carino NJ. Concrete Strength Testing. In ASTM International STP 169D Significance of Tests and Properties of Concrete and Concrete-Making Materials (Edited by Lamond JF and Pielert JH. 664 p.). ASTM International, West Conshohocken, PA; 2006.

[136] Vachon M. ASTM puts self-consolidating concrete to the test. ASTM Standardization News July; 2002: 34-37.

[137] Zia P, Nunez RA, Mata LA. Implementation of Self-Consolidating Concrete for Prestressed Concrete Girders. Research Project 2004-25. FHWA/NC/2006-30. Final Report Department of Civil Construction and Environmental Engineering, North Carolina State University, Raleigh, NC; 2005.

[138] Carrasquillo PM, Carrasquillo RL. Evaluation of the Use of Current Concrete Practice in the Production of High Strength Concrete. Materials Journal. 1988; 85(1): 49-54. https://doi.org/10.14359/2502

[139] Mindess S, Young JF, Darwin D. Concrete (2nd ed.). Pearson Education. Upper Saddle River, NJ; 2003.

[140] Tatnall PC. Fiber-reinforced concrete. In ASTM International STP 169D Significance of Tests and Properties of Concrete and Concrete-Making Materials (Edited by Lamond JF and Pielert JH. 664 p.). ASTM International. West Conshohocken, PA; 2006.

[141] Hover KC. Air Content and Density of Hardened Concrete. In ASTM International STP 169D Significance of Tests and Properties of Concrete and Concrete-Making Materials (Edited by Lamond JF and Pielert JH. 664 p.). ASTM International. West Conshohocken, PA; 2006.

[142] Higginson EC. Some Effects of Vibration and Handling on Concrete Containing Entrained Air. ACI Journal Proceedings. 1952; 49(9): 1-12.

[143] Crawley WO. "Effect of Vibration on Air Content of Mass Concrete" and Discussion by CE Wuerpel. Journal of American Concrete Institute. 1952; 49: 909-919.

[144] Mielenz RC, Wolkodoff VE, Backstrom JE, Burrows RH. Origin Evolution and Effects of the Air Void System in Concrete. Part 4—The Air Void System and Job Concrete. Proceedings of American Concrete Institute. 1958; 55: 507-517.

[145] Powers TC. The properties of fresh concrete. John Wiley Sons. New York, NY; 1968.

[146] Whiting D, Stark D. Control of air content in concrete (Report No. 258). National Cooperative Highway Research Program Transportation Research Board. Washington DC; 1983.

[147] Stark DC. Effects of vibration on the air void system and freeze-thaw durability of concrete (RD092.01T). Portland Cement Association. Skokie, IL; 1986.

[148] Plante P, Pigeon M, Saucier F. Air void stability Part II: Influence of superplasticizers and cement. ACI Materials Journal. 1989; 86(6): 581-589.

[149] Pigeon M, Plante P, Plante M. Air void stability Part I: Influence of silica fume and other parameters. ACI Materials Journal. 1989; 86(5): 482-490.

[150] Pigeon M, Saucier F, Plante P. Air void stability Part IV: Retempering. ACI Materials Journal. 1990; 87(3): 252-259.

[151] Saucier F, Pigeon M, Plante P. Air void stability Part III: Field tests of superplasticized concretes. ACI Materials Journal. 1990; 87(1): 3-11.

[152] Saucier F, Pigeon M, Cameron G. Air void stability Part V: Temperature general analysis and performance index. ACI Materials Journal. 1991; 88(1): 25-36.

[153] Simon MJ, Jenkins RB, Hover KC. The influence of immersion vibration on the air void system in concrete. In G M Idorn (Ed.), Durability of concrete: G M Idorn International Symposium (SP 131, pp. 99-126). American Concrete Institute, Farmington Hills, MI; 1992.

[154] Zhang C, Sun Y, Xu J, Wang B. The Effect of Vibration Mixing on the Mechanical Properties of Steel Fiber Concrete with Different Mix Ratios. Materials. 2021; 14(13): 3669. https://doi.org/10.3390/ma14133669

[155] Zhao M, Li J, Xie YM. Effect of vibration time on steel fibre distribution and flexural behaviours of steel fibre reinforced concrete with different flowability. Case Studies in Construction Materials. 2022; 16(52): e01114. https://doi.org/10.1016/j.cscm.2022.e01114

[156] Zheng Y, Zhou Y, Nie F, Luo H, Huang X. Effect of a Novel Vibration Mixing on the Fiber Distribution and Mechanical Properties of Ultra-High-Performance Concrete. Sustainability. 2022; 14(13): 7920. https://doi.org/10.3390/su14137920.

[157] News Room. A Fiber reinforced concrete testing primer ready mix professionals (Part 2). Copyright 2023 ABC Polymer Industries LLC; June 3, 2015. https://abcpolymerindustries.com/news-room/ (Accessed on August 13, 2026)

[158] ASTM C173/C173M-26. Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method. American Society for Testing and Materials International. West Conshohocken, PA; 2026.

[159] ASTM C231-09a. Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method. American Society for Testing and Materials International. West Conshohocken, PA; 2010.

[160] CEN. EN 14651:2005+A1:2007(Main): Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual). European Committee for Standardization (CEN); 2007.

[161] CEN. EN 12350-1: Testing fresh concrete - Part 1: Sampling and common apparatus. European Committee for Standardization (CEN); 2019.

[162] CEN. EN 12390-2: Testing hardened concrete - Part 2: Making and curing specimens for strength tests. European Committee for Standardization (CEN); 2001.

[163] Jeknavorian AA. Air-Entranced Admixtures. In ASTM International STP 169D Significance of Tests and Properties of Concrete and Concrete-Making Materials (Edited by Lamond JF and Pielert JH. 664 p.). ASTM International. West Conshohocken, PA; 2006.

[164] ASTM C143/C143M-20. Standard Test Method for Slump of Hydraulic-Cement Concrete. American Society for Testing and Materials International. West Conshohocken, PA; 2026.

[165] ASTM C1176/C1176M-20. Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table. American Society for Testing and Materials International. West Conshohocken, PA; 2020.

[166] ASTM C1435/C1435M-20. Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer. American Society for Testing and Materials International. West Conshohocken, PA; 2020.

[167] Daniel DDG. Factors Influencing Concrete Workability. In ASTM International STP 169D Significance of Tests and Properties of Concrete and Concrete-Making Materials (Edited by Lamond JF and Pielert JH, 664 p.). ASTM International. West Conshohocken PA; 2006.

[168] ASTM C1170/C1170M-20. Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table. American Society for Testing and Materials International. West Conshohocken, PA; 2020.

[169] Bahrner V. Report on Consistency Tests on Concrete Made by Means of the Vebe Consistometer. Report No. 1. Joint Research Group on Vibration of Concrete Svenska Cement-foreningen; 1940.

[170] Thaulow S. Field Testing of Concrete. Norsk Cementforening. Oslo; 1952.

[171] Thaulow S. Resume of Field Testing of Concrete Report. ACI Journal. Proceedings. 1954; 50(7): 10-11, 24-26.

[172] ACI 211.3R-02. Guide for Selecting Proportions for No-Slump Concrete. ACI Manual of Concrete Practice Part 1, American Concrete Institute, Farmington Hills, MI; 2002.

[173] Granville WR, Collins AR, Mathews DD. The Grading of Aggregate and Workability of Concrete (Road Research Technical Paper No. 5). Her Majesty’s Stationery Office, London; 1947.

[174] ASTM C330/C330M-23. Standard Specification for Lightweight Aggregates for Structural Concrete. American Society for Testing and Materials International. West Conshohocken, PA; 2023.

[175] Fouad FH. Cellular Concrete. In ASTM International STP 169D Significance of Tests and Properties of Concrete and Concrete-Making Materials (Edited by Lamond JF and Pielert JH. 664 p.). ASTM International. West Conshohocken, PA; 2006.

[176] Adaska WS. Roller-Compacted Concrete (RCC). In ASTM International STP 169D Significance of Tests and Properties of Concrete and Concrete-Making Materials (Edited by Lamond JF and Pielert JH. 664 p.). ASTM International. West Conshohocken, PA; 2006.

[177] ASTM D1557-12. Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)). American Society for Testing and Materials International. West Conshohocken, PA, 2021.

[178] Amer N, Delatte N, Storey C. Using Gyratory Compaction to Investigate Density and Mechanical Properties of Roller-Compacted Concrete. In Transportation Research Record: Journal of the Transportation Research Board. 2003; 1834(1). https://doi.org/10.3141/1834-10.

[179] Uygunoglu T, Topçu IB, Celi AG. Use of waste marble and recycled aggregates in self-compacting concrete for environmental sustainability. Journal of Cleaner Production. 2014; 84(1): 691-700. https://doi.org/10.1016/j.jclepro.2014.06.019

[180] Parida SP, Dash RR. Effect of volume fraction and fiber orientation on modal characteristics of composite beam. International Journal of Advance Research in Science And Engineering. 2014; 3(2): 299-309.

[181] Roy M, Hollmann C, Wille K. Influence of Fiber Volume Fraction and Fiber Orientation on the Uniaxial Tensile Behavior of Rebar-Reinforced Ultra-High Performance Concrete. Fibers. 2019; 7(7): 67. https://doi.org/10.3390/fib7070067

[182] Zhao M, Li J, Xie Y.M. Effect of vibration time on steel fibre distribution and flexural behaviours of steel fibre reinforced concrete with different flowability. Case Studies in Construction Materials. 2022; 16. https://doi.org/10.1016/j.cscm.2022.e01114

[183] Venkateshwaran S, Rajesh AA. A review on the study of strength properties of high-performance concrete using various fibers. International Research Journal of Multidisciplinary Technovation. 2019; 1(6): 411-415. https://doi.org/10.34256/irjmtcon56

[184] ASTM C192/C192M-24. Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory. American Society for Testing and Materials International. West Conshohocken, PA; 2024.

Downloads

Published

2026-11-19

Issue

Section

Articles

Categories

How to Cite

1.
Fiber Types, Properties, and Vibration Effects in Fiber-Reinforced and Ultra-High Performance Concrete: A Review. Int. J. Archit. Eng. Technol. [Internet]. 2026 Nov. 19 [cited 2026 Nov. 22];13(3):312-49. Available from: https://avantipublishers.com/index.php/ijaet/article/view/1865

Similar Articles

61-67 of 67

You may also start an advanced similarity search for this article.